Post Offer Free
Zhejiang East Zhouqiang Plastic&Mould Industry Co., Ltd.
Zhejiang East Zhouqiang Plastic&Mould Industry Co., Ltd.  

Gold Index: 14474

You are here: home  > blow molding machine  > stretch blow molding machine  > water bottle blowing machine manufacturing line

water bottle blowing machine manufacturing line 

Payment Terms: T/T,L/C 
Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: ZQ-A600-2
Production Capacity: 30 Sets/Month
Delivery Date: 40 Days
Certificates: ISO9001:2008
Means of Transport: Ocean
Packing: General Packing
Certificate: CE

Water bottle blowing machine
1)requires labor to put performs into the preheater.
2)bottles:carbonated,mineral,pesticide,cosmetics,wide-mouth,etc.

ZQ-A600-2 water bottle blowing machine manufacturing line
ZQ-A600-2
, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,1.5L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc.
Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can't transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
Settings:
a).PLC colour display: OMRON(JAPAN)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor DELTA(TAIWAN)
d).Other electric parts are all world-famous brand

ZQ-A600-2 water bottle blowing machine manufacturing line
Features:
A.     Stable performance with advanced PLC.
B.     Conveying preforms automatically with conveyor.
C.     Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D.     High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E.     High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.     No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G.     Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H.     Strong clamping force with high pressure and double crank links to lock the mold.
I.     Two ways of operating: automatic and manual.
J.     Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K.     Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L.     Contamination is avoided for the bottle body.
M.     Ideal effect of the chilling with the chilling system.
N.     Easy installation and starting
O.     Low rejection rate: less than 0.2 percent.

ZQ-A600-2 water bottle blowing machine manufacturing line
TYPEITEMZQ-A600ZQ-A600-2ZQ-A600-3
CONTAINERNumber of cavity123
Output1100-1400 pcs/hr1700-2300 pcs/hr3000-3300 pcs/hr
Max.container volume0.6L0.6L0.6L
Max.neck diameter38mm38mm38mm
Max.container diameter60mm60mm60mm
Max.container height260mm260mm260mm
ELECTRICAL SYSTEMNumber of lamp14pcs28pcs32pcs
Max.heating power9kw22kw32kw
Installation power12kw25kw35kw
Actual power consumption9kw14kw20kw
AIR SYSTEMOperatating pressure7kg/cm²7kg/cm²7kg/cm²
Low pressure consuming800Ltr/min1000 Ltr/min1200 Ltr/min
Blowing pressure≤30kg/cm²≤30kg/cm²≤30kg/cm²
High pressure consuming1200-1600Ltr/min1500-2000Ltr/min2000-2500Ltr/min
CHILLER WATEROperating pressure5-6 kg/cm²5-6 kg/cm²5-6 kg/cm²
Temperatuer10°C10°C10°C
Consuming3600kcal/hr5600kcal/hr7600kcal/hr
Flow rater20Ltr/min30Ltr/min40Ltr/min
MACHINEMachine dimension2.5×1.4×1.7(m)2.9×1.55×1.8(m)3.4×1.4×1.8(m)
Machine weight1.5T1.6T1.9T
bigPhoto
 Mr. Louis Yang
Manager
Tel: 86-576-84081677
Fax: 86-576-84081662
Contact to this supplier

Didn't find what you're looking for? Post Buying Lead or contact HiSupplier Customer Service Center  for help!

Related Search

Find more related products in following catalogs on Hisupplier.com

Related Products

Company Info

Zhejiang East Zhouqiang Plastic&Mould Industry Co., Ltd. [China (Mainland)]


Business Type:Manufacturer, Trading Company
City: Taizhou
Province/State: Zhejiang
Country/Region: China (Mainland)

You May Like: